| |
 |
 Solar Fixture |
|
|
|
|
LED Lamps |
Multi Functional Headlamp:
1.The Miner's headlamp is based on integrated industrial design,with lithium battery of large capacitance and high brightness LEDs as light source.
2.This lamp is small and light in weight(about 120g)and looks fashionable.It is highly reliable and has a long work life,which gives you an exceptional cost performance.
3.There are many ways of using it.It can be used as a general head lamp,or on an ordinary safety helmet or even a miner's safety helmet.There are two modes(common and high brightness)and the three modes(power-saving,high brightness and flashing)available in our design.The lamp can durably light for up to dozens of hours with a light projection range of up to 100 meter.
4.Flexible ways of recharging:The lamp can be recharged by a portable charger,or can be connected to any 4.2V DC supply to prolong its working hours while being recharged. The battery can be recharged for up to 1000 times.
5.Inside the lamp there is a fuse to protect the circuit against over-charge,over-discharge,over current.With a touch switch,it is convenient to operate.The unique flash mode allows you to use the lamp as an SOS signal light. This function is also used to measure the remaining power in the battery(an invention by us).
6.With highly rigid, flame retardant ABS engineering plastic as its housing and tempered glass as its lens,the lamp has a protection against water,dust,and explosiveness,and a special circuitry is designed to keep the temperature inside the lamp within 60 degrees Celsius.
7.This lamp can be widely used in agriculture(such as rubber tapping,fishing,farmland or orchard patrolling at night,etc.),outdoor operations(such as oilfields, railways,power supply,subway,constructions sites etc), mining,and expedition in the wilderness and so on.
Notes:
1.Ambient temperature:-40¡æ to 60¡æ.Elevation above sea level:-1000m to 5000m.
2.Special design is available according to requirement of clients.For example,light control level,adjustable brightness,control method by sound or by light,etc.
3.Charge time:4-8hours.Car charger available.
4.If the lamp is not used for long time,it should be put under cool and dry environment.The light should be charged at least once a month.
5.Generally,200-400 lux brightness is enough for reading. The light source is mainly warm color. |
| ¡¡
|
 |
| Specification for Head Lamp series |
| Item |
Model |
Descriptions |
HL16C3
(HEAD LAMP 1600mAH) |
 |
3.5V~4.2V static current
1600mAH
Three Level Flash: Week (600lux/m)
Strong(1100lux/m)
Flash
Cover on head directly
Need specified. |
HL16C2
(Head Lamp 1600mAH) |
 |
3.5V~4.2V static current
1600mAH
Three Level Flash: Week (600lux/m)
Strong(1100lux/m)
Cover on head directly |
HA22C3
(An'quan Head Lamp 2200mAH) |
 |
3.5V~4.2V static current
1600mAH
Three Level Flash: Week (600lux/m)
Strong(1100lux/m)
Viewing Distance: 20~30m
Belt can be put on helmets |
HK25B3
(Kuangdeng 2500mAH) |
 |
3.5V~4.2V static current
1600mAH
Three Level Flash: Week (600lux/m)
Strong(1100lux/m)
Viewing Distance: 20~30m
Belt can be put on helmets,ABS Explosion Proof protection,IP64 |
Note: 1. Charger will cut off automatically if Voltage is over 4.25V,
2. IC inside the Lamps will also cut off for protection,
3. There is a safety brake that can cut off for protecting battery. |
|
| |
|
|
